Oce im5530 Quick Start Manual page 57

Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Mac OS X in a TCP/IP network using
CUPS. Even though IPP printing can be used in a local area network, this method is commonly used to
print over the Internet. If you allow IPP printing through the Internet, you must configure the DNS server to
enable users to access this equipment over the Internet using the HTTP protocol. This is useful when
users want to print to this equipment from outside the local area network.
IPP printing for Macintosh is available for Mac OS X 10.2.4 to 10.3.x.
Setup Flow
Connect this equip-
ment
Set up the TCP/IP
Connecting over Internet
Setting up the IPP
printer connection
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Reference: Printer Utility Guide
• Chapter 7 "PRINTER UTILITY ADMINISTRATOR MODE"
"Setting up from Printer Utility"
"Setting up Network Settings"
"Setting up the TCP/IP"
Description/Reference
Mac OS X
5
55