Oce im5530 Quick Start Manual page 46

6.SETUP FLOW FOR PRINTING FEATURES (Cont.)
Setup Flow for SMB Printing
This equipment can be used with SMB printer connection that allows you to connect to this equipment
using File and Printer Sharing for Microsoft Networks service. SMB printing is the common method to set-
ting up the printer from the Windows 98/Me computers. However, SMB printing is not suitable for printing
a large amount of documents.
5
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows 2000,
Windows XP, or Windows Server 2003 as a print server, it is recommended to set up for printing via Win-
dows print server.
P.48 "Setup Flow for Printing via Windows Print Server"
Setup Flow
Connect this equip-
ment
Set up the TCP/IP
44
5.SETUP FLOW
Network Environment over TCP/IP
Setting up SMB
Printer Connection
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Reference: Printer Utility Guide
• Chapter 7 "PRINTER UTILITY ADMINISTRATOR MODE"
"Setting up from Printer Utility"
"Setting up Network Settings"
"Setting up the TCP/IP"
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Description/Reference