Advertisement
Insert front brace under control panel and between cart side panels.
5
Secure using two 1/4-20x1½" screws, 7mm lock washers, and 7mm
flat washers on each side.
NOTE: Do not fully tighten screws as some adjustments may
need to be made when installing Doors on step 14.
Front brace
On back of grill, place upper back panel between side panels
6
and above lower back panel. Secure upper back panel, in
lower holes, using one 1/4-20x1½" screw, 7mm lock washer,
and 7mm flat washer on each side. Do not fully tighten
screws until side shelf installation is complete in later
steps.
16 • 463270708
Door Pin in
downward
position
7mm lock
washer
7mm flat
washer
1/4-20x1½"
7mm lock
7mm flat
screw
washer
washer
Rear upper panel
1/4-20x1½" screw
Advertisement
