Table of Contents
Advertisement
Delete all old messages
1. Press Menu. Display shows
2. Scroll
to
DELETE MESSAGE
3. Press
to confirm or
Yes
Memory full
The display flashes
The machine will also automatically set to Answer Only.
Press
to hear unplayed messages. You must delete
messages before your machine can record new ones.
Answer settings
Use the settings menu to select:
Answer & Record or Answer Only mode, outgoing message
male or female voice, answer delay, call screening on/off,
remote access on/off and remote access PIN.
Explanations for these settings can be found opposite in the
note column.
If you experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com
ANSWER MACHINE
and press OK.
to cancel.
No
.
You can delete played messages on
your answering machine via the menu.
. Press OK.
Answer mode
Set Answer & Record or Answer Only
outgoing message
Answer delay
Answer delay sets the amount of time
before your BT Paragon 550 answering
machine picks up a call. The default
setting is 15 seconds. You can select
an answer delay of 0, 5, 10, 15, 20,
25, 30 seconds or Time Saver. Time
Saver can save you the cost of a call
when you want to ring in to find out if
you have new messages. If your
answering machine answers after 10
seconds, you have new messages. If
you have no new messages, it won't
answer your call until 20 seconds
which gives you the opportunity to
hang up and save the cost of a call.
Answering machine
49
Advertisement
Table of Contents
