Table of Contents
Advertisement
Outgoing messages
This is the message your callers hear when the answering
machine picks up their call. Your BT Paragon 550 comes with two
pre-recorded outgoing messages to choose from, see opposite.
Record your own outgoing message
1. Press Menu. Display shows
2. Scroll
to
OUTGOING MESSAGE
3.
is highlighted. Press OK.
RECORD MESSAGE
4.
is highlighted. If required, press
ANS & RECORD
to select
ANSWER ONLY
5. Press
to begin recording. Speak your outgoing message after
OK
the beep. Press
Save
When recording an OGM you should speak to the mic on the
base, you should not lift and speak into the handset.
If you press Save, your message is saved and played back.
Play / delete outgoing message
1. Press Menu. Display shows
2. Scroll
to
OUTGOING MESSAGE
3. Scroll
to
PLAY MESSAGE
4. Press
or
to select
press OK.
If you experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com
ANSWER MACHINE
and press OK.
.
to stop recording or
Delete
ANSWER MACHINE
and press OK.
and press OK.
or
ANS & RECORD
. Press OK.
or
to cancel.
. Press OK.
and
ANSWER ONLY
Answering machine
Answer & Record
This invites your caller to leave a
message.
The pre-recorded message is 'Hello,
your call cannot be taken at the
moment, so please leave your message
after the tone'.
Answer Only
This does not allow your caller to leave
a message.
The pre-recorded message is 'Hello,
your call cannot be taken at the
moment, and you cannot leave a
message, so please call later'.
Set answer mode
To set your answering machine mode
to Answer & Record or Answer Only
see Answering Machine Settings,
page 49-50.
47
Advertisement
Table of Contents
