42
Settings
You can set the dialling mode as
Tone/Timed Break, /Tone/Earth or
Pulse/Earth.
Tone is the default setting for the UK
you should only have to change this if
connected to a switchboard that
requires Pulse dialling.
If connected to a switchboard, you
may need to enter an access code (e.g.
9) before each number is dialled. Your
BT Paragon 550 can store an access
code which is automatically dialled
before each number.
If set to ON, Auto prefix will only apply
to numbers stored in your phonebook.
Any numbers dialled manually will not
be auto prefixed; this is because
internal numbers are unlikely to need
the prefix.
If you experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Dial mode
1. Press Menu, scroll
2. Scroll
to
DIAL MODE
3. Press
or
to select the setting you want.
4. Press
to confirm.
Save
PBX/switchboard access (Auto prefix)
Store an access code
1. Press Menu, scroll
2. Scroll
to
AUTO PREFIX
3. Use
or
to select
4 and 5. If you select
4. Enter the access code, e.g. 9.
5. Press
to confirm.
Save
to
and press OK.
SETTINGS
. Press OK.
to
and press OK.
SETTINGS
and press OK.
or
. If you select
ON
OFF
you will go back one level.
OFF
follow steps
ON