Finding Customer Support - Intergraph StudioZ RenderRAX System Setup

Table of Contents

Advertisement

Version Manager lets you create backup diskettes containing drivers and other system
software products that were installed on the system before shipment. You may need these
backup diskettes later -- for example, if you have to re-install a device driver or the operating
system.
WARNING
You must create system software backup diskettes after you set up the system
hardware and complete the operating system Setup program. If you do not do this, you
may not be able to re-install critical system software or the operating system if needed.
NOTE
You may not have to create backup diskettes for system software. If Version Manager does
not list drivers or other system software products, they are available on the operating system
software CD-ROM or on backup diskettes delivered with expansion boards.
If the system requires Quick-Fix Engineering (QFE) update software, it is included in the
system software available for backup diskette creation. QFE update software contains fixes
for operating system problems or limitations, and is only shipped with the system if it is
needed. If QFE update software is shipped with the system, you should create a QFE backup
diskette for use if you have to re-install the operating system.
Refer to Version Manager Help for information on creating Intergraph system software and
other diskettes. Check the Intergraph site on the World Wide Web and vendor bulletin boards
for new and updated drivers.

Finding Customer Support

The Support tab contains information useful in contacting Customer Support. This
information is repeated in the Preface, earlier in this Guide.
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StudioZ RenderRAX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents