Start The System - Intergraph StudioZ RenderRAX System Setup

4
Have several blank, formatted diskettes available to create backup diskettes containing system
software.
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where drive is the drive
letter for the CD-ROM drive:
drive:\i386

Start the System

RenderRAX uses a two-position power switch on the front panel for starting and stopping and
the system. Each position (o = off, | = on) is symbolized along the edge of the power switch
as shown in the following figure.
To start the system, insert the key in the power switch and turn it clockwise to the | position.
The Windows NT Setup screen displays as described in the following sections.
386 directory (the Intel software directory) on the
I
Power Switch
Power On LED
Disk
Activity
LED