Going Through Windows Nt Setup - Intergraph StudioZ RenderRAX System Setup

Going Through Windows NT Setup

The first time you start the system, it boots to a Microsoft End User License Agreement
(EULA) screen for the operating system. Enter the Product Identification Number, found on
the Certificate of Authenticity included with your operating system documentation.
NOTE You must enter the Product Identification Number before you can continue Setup. You cannot
complete Setup if you do not enter the number.
After reviewing the terms of the EULA, follow the instructions displayed on-screen to
continue the Setup process. Take the default settings provided by Setup, except as noted in
the following text. You can set up a user account and join a workgroup or domain after you
configure the video display, the sound processor, and networking.
u
Allow Setup to configure the network only if you have an installed network adapter, and
the system is connected to the network.
u
When prompted to create an Emergency Repair Disk, do so.
u
If you do not set up a user account during Setup, press
dialog to log on to the operating system.
For more information on Setup, and on using the interface features of the operating system,
refer to the operating system documentation and Help.
or select OK at the logon
ENTER
5