Fender B-DEC30 Midi Manual page 15

Transferring a single preset from the DEC to the PC
1. In the "Sysex View and Scratchpad" window (third icon in the toolbar) go to the "Sysex/Receive
manual dump" menu. You will be prompted for a filename for your preset. Enter the name and
press SAVE. A window will appear indicating that MIDI-OX is waiting for a dump.
2. Press the UTILITY button on the DEC three times, which will take you to the DUMP PRST
function.
3. Press the SAVE button on the DEC. You should see some data activity in the Monitor MIDI-OX
screen and an indication that data was sent. See Figure17. The Sysex Receive window shows 62
bytes received (will show 66 bytes for the B-DEC30).
Figure 17: Dump a single preset to the PC.
Congratulations, you have now saved a preset to the PC.
Saving all presets at once
Now would be a good time to preserve all of your presets. The above procedure also can be used to save
all of the DEC user presets. The only difference is you must use the DUMP ALL function rather than the
DUMP PRST function. Try it. The Sysex Receive window should indicate a much larger dump has
occurred. See Figure 18. In this example 2463 byes were received.
©2005 FMIC
The Trademarks referenced herein, not owned by FMIC, are trademarks owned by their respective owners.
All rights reserved.