Input Label; Sleep Timer - Sharp LC-19SB15U, LC-19SB25U, LC-19SB25U-W Operation Manual

Useful adjustment settings

Input Label

Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Press INPUT to select the desired input
1
source.
Press MENU to display the MENU screen, and
2
then press c / d to select "Setup".
Press a / b to select "Input Label", and then
3
press ENTER.
Press a / b / c / d to select the new name for
4
the input mode, and then press ENTER.
Example
Press MENU to exit.
5
• You cannot change labels if the INPUT SOURCE is TV.
This manual downloaded from http://www.manualowl.com

Sleep Timer

Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remaining
Each time you press SLEEP, the remaining
2
time switches as shown below.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
30 min
35