Input Label; Image Position; Position - Sharp Aquos LC-32PX5X Operation Manual

Useful adjustment settings

Input Label

You can assign each input source a label you like.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
Press a / b to select characters and c / d
5
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input Label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
6
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
TV
NOTE
• You cannot change labels if the input source is TV.
28
INPUT1
INPUT2
DVD
INPUT4
(Example)

Image position

For adjusting a picture's horizontal and vertical

position.

Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Position", and then
3
press ENTER.
Press a / b to select "H-Pos." or "V-Pos.".
4
H-Pos. [0]
V-Pos. [0]
Reset
Press c / d to adjust the item to your desired
5
position.
Selected item
H-Pos. Centres the image by moving it to the left
or right.
V-Pos. Centres the image by moving it up or
down.
NOTE
• For resetting all adjustment items to the factory preset
values, press a / b to select "Reset", and then press
ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or input signals.
+
+
Description