Initial Setup - Sharp LC-19SB15U, LC-19SB25U, LC-19SB25U-W Operation Manual

Watching TV

Initial setup

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 13.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language setting
Select from among 3 languages: English, French and
Spanish.
Press a / b to select the desired language
1
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air", "Cable(STD)", "Cable(HRC)" or
"Cable(IRC)".
Press a / b to select "Air", "Cable(STD)",
2
"Cable(HRC)" or "Cable(IRC)".
Press ENTER to enter the setting.
Example
Language
Air/Cable
CH Search CH Search
Air
Cable (STD)
Cable (HRC)
Cable (IRC)
This manual downloaded from http://www.manualowl.com
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
When "Air/Cable" has been selected in
3
Antenna setting and then press ENTER
again.
Language
Air/Cable
CH Search
Press a / b to select "Analog & Digital" to
search both analog and digital broadcasts or
"Analog" to search only analog broadcasts or
"Digital" to search only digital broadcasts, and
then press ENTER.
Press a / b to select "Yes" or "No", and then
press ENTER.
Analog & Digital
Digital
Analog
Yes
No
• The Channel search will start automatically.
• To exit the Channel search screen, press
RETURN.
Example
Analog
Air [69]
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again. (See page 23.)
17