Camera Presets - TANDBERG 770 MXP User Manual

TANDBERG 770_880_990MXP User Manual
Example: You cannot see what the far end is writing on their whiteboard.
Choose Move Camera from the main menu. Choose Far End from the dialog box. Use
Zoom and arrow keys to move the far end camera. Press OK when done to go back to
normal.
See also 3.13.3 Far End Control for more about Far End Control functionality.

3.10.3 Camera Presets

Use Camera Presets to easily vary between specific camera positions. When you are in a
call, presets are available directly on the number keys on the remote control. Press a number
to activate a Camera Preset. You can save presets 1-9 presets by the corresponding number
for 1 second. Note that Camera Presets does not work when you are in an input field (then
you need the numbers for dialing). Camera Presets are also available from the Camera
Presets menu under Control Panel.
Each Camera Preset is able to store:
 Main Camera position (pan, tilt, zoom).
 Video source.
 Audio source selection (see chapter 4.5 Audio for further details).
How to use Camera Presets:
1. When you are in a call, press a number on the remote control. The camera will move
to the corresponding position (or video source).
2. Alternatively, open the Presets menu in Control Panel. Choose Display Presets and
select a preset with arrow keys and OK.
3. Presets are deactivated when you move the camera manually with the arrow keys.
How to save a new Preset:
1. Position the camera in the desired position.
2. Press a number for 1 second to save the corresponding preset.
3. Alternatively, open the Presets menu in Control Panel. Choose Save New Preset.
You can save 15 presets on numbers 0-14. Enter a number (0-14) and press Save.
The new Preset will overwrite an excising preset.
Example: In your office you have a white board, your PC and a small meeting table. Use
Presets to move between these camera positions.
Use Camera Presets to quickly and precisely change camera positions and video
sources between these three targets. Position the camera to the white board and save it
as preset 1 (save a preset by pressing the number key for 1 second). Press the
Presentation key to open a PC presentation and save this as preset 2. Position the
camera to meeting table and save it as preset 3. When you are in a video call, use the
numbers 1, 2 and 3 to activate these presets.
40