At A Glance - TANDBERG 770 MXP User Manual

TANDBERG 770_880_990MXP User Manual

1.1 At a Glance

Camera
The built-in camera includes a high quality colour camera with a fast pan/tilt/zoom action. The
camera is
controlled by the system's infra-red remote control and operates pan/tilt, focus and zoom.
Codec
The Codec is the heart of the system. The main task for the Codec is the compression of
outgoing video, audio
and data, the transmission of this information to a remote site and the decompression of the
incoming
information. Hence the name Codec. Intelligent Call Management (ICM) and the SoftMux are
features built into the
Codec.
Remote Control
The remote control is used to control all functions of the system. If the screen saver is
activated (black monitor), touching the remote control will automatically wake up the system.
The remote control uses 4 AAA batteries. The system will tell you when batteries are running
low. Change batteries from the backside of the remote control.
The reach of the remote control signal is 20 meters. For users sitting in an open plan office,
this can cause problems. Use the little, white switch placed under the batteries to change the
reach of the signal from 20 meters to 2 meters. This will prevent you from unintentionally
controlling your neighbor's video system, when you control your own system.
6