Searching A Recording By Date - Date Search - Sony DCR-TRV940 Service Manual

Searching a recording by date
– DATE SEARCH
You can automatically search for the point where the recording date changes and start
playback from that point (date search). Use a cassette with cassette memory for
convenience. Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
Before operation
•You can use this function only when playing back a cassette with cassette memory.
•Set CM SEARCH in
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
(3) Press . or > on the Remote Commander to select the date for playback.
2
SEARCH
MODE
3
.
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press x.
90
SEARCH indicator appears. The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
(no indicator)
Your camcorder automatically starts playback at the beginning of the selected
date.
DATE SEARCH
1 SEP/ 5/02
2 SEP/ 6/02
3 DEC/24/02
4 JAN/ 1/03
5 FEB/ 11/03
6 APR/ 29/03
DATE SEARCH
1 SEP/ 5/02
2 SEP/ 6/02
>
3 DEC/24/02
4 JAN/ 1/03
5 FEB/ 11/03
6 APR/ 29/03
[b] [a]
to ON in the menu settings. (The default setting is ON.)
T PHOTO SCAN