Step 4 Using The Touch Panel - Sony DCR-TRV940 Service Manual

Step 4 Using the touch panel

Your camcorder has operation buttons on the LCD screen. Touch the LCD screen
directly with your finger or the supplied stylus (DCR-TRV950 only) to operate each
function. This section describes how to operate the touch panel during recording or
playing back images on a tape.
(1) Prepare the power supply (p. 15 to 19).
(2) Press OPEN to open the LCD panel.
(3) Set the POWER switch to CAMERA or VCR while pressing the small green
(4) Press FN. Operation buttons appear on the LCD screen.
(5) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(6) Press a desired operation item. Refer to relevant pages of this manual for each
5,6
When the POWER switch
is set to CAMERA
To return to FN
Press EXIT.
To execute settings
Press
To cancel settings
Press
24
button.
function.
PAGE1 PAGE2 EXIT
END
SCH
SPOT DIG MEM SPOT
FOCUS EFFT M I X METER
PAGE1 PAGE2 EXIT
LCD SELF
BRT TIMER
OK. The display returns to PAGE1/PAGE2.
OFF to return to PAGE1/PAGE2.
4
FN
2
3
POWER
MEMORY/
NETWORK
1