Audio Dubbing - Sony DCR-TRV940 Service Manual

Audio dubbing

You can record audio to add to the original sound on a tape by connecting audio
equipment or a microphone. If you connect audio equipment, you can add sound to
your recorded tape already recorded in the 12-bit mode by specifying the start and end
points. The original sound will not be erased.
Use the Remote Commander for this operation.
Select one of the following connections to add audio.
Connecting the microphone with the MIC jack
: Signal flow
You can check recorded picture and sound by connecting your camcorder to a TV with
the A/V connecting cable.
Recorded sound is not output from a speaker. Check the sound by using a TV or
headphones.
Connecting the microphone to the intelligent accessory shoe
Microphone (optional)
Microphone (optional)
Intelligent accessory shoe
MIC
(PLUG IN POWER)
115