Step 3 Inserting A Cassette - Sony DCR-TRV940 Service Manual

Step 3 Inserting a cassette

(1) Prepare the power supply.
(2) Slide
The cassette compartment automatically lifts up and opens.
(3) Insert the cassette straight as far as possible into the cassette compartment with
the window facing out and the write-protect tab facing upward.
(4) Close the cassette compartment by pressing
The cassette compartment automatically goes down.
(5) After the cassette compartment goes down completely, close the lid until it
clicks.
2
OPEN/Z EJECT
To eject a cassette
Follow the procedure above, and take out the cassette in step 3.
Notes
•Do not press the cassette compartment down forcibly. Doing so may cause a
malfunction.
•The cassette compartment may not be closed when you press any part of the cassette
compartment other than the
When you use a cassette with cassette memory
Read the instruction about cassette memory to use this function properly (p. 228).
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
OPEN/Z EJECT in the direction of the arrow and open the lid.
3
on the cassette compartment.
4, 5
mark.
23