Sony DCR-TRV940 Service Manual page 225

Changing the default settings with the menu
Icon/item Mode
OTHERS
DISPLAY
z LCD
REC LAMP
z ON
VIDEO EDIT
z RETURN
Note
If you press DISPLAY/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu
settings, the picture from a TV or VCR will not appear on the LCD screen even when
your camcorder is connected to outputs on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend that you
set REC LAMP to OFF.
In more than five minutes after removing the power supply
The FLASH LVL, HiFi SOUND, AUDIO MIX, MIC LEVEL and COMMANDER settings
are returned to their default settings.
Other menu settings are held in memory even after removing the power supply.
Meaning
To show the display on the LCD screen and in
the viewfinder
V-OUT/LCD To show the display on the TV screen, LCD
screen and in the viewfinder
To light up the camera recording lamp at the
front of your camcorder
OFF To turn the camera recording lamp off so that
the person is not aware of the recording
To cancel video editing.
TAPE To make program and dub on the tape in the
other VCR (p. 98)
MEMORY To make program and dub on a "Memory Stick"
(p. 160)
(continued on the following page)
POWER
switch
VCR
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
VCR
217