Viewing Moving Pictures - Mpeg Movie Playback - Sony DCR-TRV940 Service Manual

Viewing moving pictures
– MPEG movie playback
You can play back moving pictures recorded on a "Memory Stick." You can also play
back six images including still images in order at a time by selecting the index screen.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only) or VCR.
Make sure that the LOCK switch is set to the further side (unlock position).
(2) Press PLAY or
(3) Press +/– to select the desired moving pictures.
– : To see the previous picture
+ : To see the next picture
(4) Press MPEG N X to start playback.
(5) To adjust the volume, press either of the two buttons on VOLUME.
– : To turn down
+ : To turn up
When you close the LCD panel, sound is muted.
2
PLAY
To stop MPEG movie playback
Press MPEG N X.
Note
You may not be able to play back images with your camcorder:
– When playing back image data modified on your computer.
– When playing back image data shot with other equipment.
To play back recorded images on a TV screen
• Before operation connect your camcorder to the TV with the A/V connecting cable
supplied with your camcorder.
• Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
Moving pictures
You can select moving pictures also with –/+ on PAGE1/PAGE2/PAGE3.
When no image is recorded on the "Memory Stick"
When you press MEMORY PLAY on the Remote Commander, the message "
FILE" appears.
168
PB. The last recorded image is displayed.
PB
VOLUME
NO