Recording - Basics; Recording A Picture - Sony DCR-TRV940 Service Manual

— Recording – Basics —

Recording a picture

Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and pull the lens cap
(2) Prepare the power supply and insert a cassette. See "Step 1" to "Step 3" for
(3) Set the POWER switch to CAMERA while pressing the small green button.
(4) Press OPEN to open the LCD panel. The viewfinder automatically turns off.
(5) Press START/STOP. Your camcorder starts recording. The REC indicator
3
LOCK switch
P O W E
R
4
2
5
POWER
MEMORY/
NETWORK
26
string to fix it.
more information (p. 15 to 23).
This sets your camcorder to the standby.
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP again.
40min
REC 0:00:01
1
Microphone
Camera recording
lamp