Remote Control - Sanyo PLC-XT35 Owner's Manual

Part Names and Functions

Remote Control

r
t
y
u
i
o
q STAND-BY button
Turn the projector off (p.25).
w WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
e SIgNAL EMISSION indicator
Lights red while the laser beam is being emitted
from the laser light window or a signal is being sent
from the remote control to the projector (p.32).
r LASER LIghT window
A laser beam is emitted from here (p.32).
t ON button
Turn the projector on (p.24).
y INPUT 1 – 3 buttons
Select an input source (INPUT 1 – INPUT 3) (pp.34–
35).
u AUTO PC button
Automatically adjusts the computer image to its
optimum setting (pp.30, 38).
i FREEZE button
Freeze the picture on the screen (p.30).
14
e w q
!1
!0
!2
ed 7 8 ( VOLUME + / – ) buttons
o POINT
– Select an item or adjust the value in the On-
Screen Menu (p.26).
– Pan the image in Digital zoom + mode (p.47).
– Adjust the volume level (with Point
(p.29).
!0 PRESENTATION POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (pp.32–33).
!1 INFO. button
Display the input source information (p.28).
!2 L-CLICk button
Acts as the left mouse button for wireless mouse
operation (p.33).
To ensure safe operation, observe the following
precautions:
– D o not bend, drop, or expose the remote control to
moisture or heat.
– F or cleaning,
use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemical materials.
buttons)
7 8