Matrox Extio F1220 User Manual page 8

Step-by-step connection setup
WARNING:
warm to the touch. Make sure your unit is located in a well ventilated area and nothing is
blocking its ventilation holes.
Connect your unit to your
1
interface card
To connect your Extio unit to your interface
card, you need a dual LC optical cable (sold
separately).
Connect one end of your optical cable to the
optical connector of your interface card.
Connect the other end of your cable to the
optical connector on your unit. Make sure
your connectors are properly connected.
Note:
cable supported by your Matrox product is
250 meters/750 feet. For more
information,
page
Connect your monitors
2
Extio F1400/F1420 – Connect your
monitors to the monitor connectors at the
back of your Extio unit.
If your monitors have DVI connectors,
connect them directly to the monitor
connectors at the back of your unit.
If your monitors have HD-15 connectors,
use DVI-to-HD15 adapters to connect your
monitors to the monitor connectors at the
back of your unit.
8 Matrox Extio Series – User Guide
Because the body of your Extio unit is used to disperse heat, it may become
The maximum length of optical
see "Product information",
30.
Cable A
Cable B
Optical cable
Cable B
Monitor
connector (DVI)
DVI-to-HD15
adapter
Monitor connector
(HD-15)
Cable A