Matrox Extio F1220 User Manual page 17

2
Solution
If none of your displays are available, reinstall your Matrox display drivers. For more
information on reinstalling your display driver, see the following solution.
2
Cause
Files on your system may have been deleted or corrupted.
1
Solution
Remove, then reinstall Matrox software:
Note: Before removing software, make sure you have all the necessary files to reinstall
software that may still be needed. Also, make sure the display driver you reinstall supports
all Matrox products in your computer.
Windows 2000/XP/Vista –
If your primary display is currently unusable, restart your computer in VGA mode
1
"Restarting in VGA mode", page
To remove Matrox software:
2
Windows 2000/XP –
a Click
"
configuration of Windows, this part of the step may not be necessary.)
Click
b
Click
c
Windows Vista –
Click
a
Matrox Driver
of Windows, this part of the step may not be necessary.)
Click
b
Click
c
Restart your computer.
3
After removing Matrox software, install the latest display driver for your Matrox product.
4
You may also need to reinstall other Matrox software.
Note: Windows 2000/XP/Vista – You may need administrator rights to remove certain
software. For more information, see Windows documentation.
" * "
Start Settings Control Panel
"
Matrox Driver Change/Remove
if you're asked to restart your computer.
No
Matrox PowerDesk-SE
" * "
Start Settings
"
Uninstall
if you're asked to restart your computer.
No
Matrox PowerDesk-SE
13).
"
Add/Remove Programs
" . (* Depending on your version and
Yes
" "
Change/Remove
"
Control Panel Programs
. (* Depending on your version and configuration
"
Yes
" "
Uninstall/Change
Matrox Extio Series – User Guide 17
(double-click*)
.
Yes
* "
Program and Features
.
Yes
(see
"