Matrox Extio F1220 User Manual page 28

Windows Vista –
Right-click the speaker icon (
1
If you don't see the speaker icon:
a
b
c
d
Select
2
device is listed as not working, right-click the device icon and select
Note:
Show disabled devices
For each device you want to use,
3
double-click the device icon and
select
volume slider value is okay and the volume button is enabled (
the volume of a playback device, right-click the device icon in the
sheet and select
Select
4
device is listed as not working, right-click the device icon and select
Note:
Show disabled devices
For each device you want to use, double-click the device icon and select
5
sure the volume slider value is okay (if you're not sure, try a value of 50) and the volume
button is enabled (
there is an audio source plugged into it and playing, then watch the volume meter next
to the audio device icon. The volume meter should be between 60 and 100%.)
5
Cause
The problem may be specific to the audio hardware of your computer.
1
Solution
For more information, see the documentation for the audio hardware of your computer.
28 Matrox Extio Series – User Guide
Right-click the taskbar and select
Under , enable the
System icons
Click .
OK
Right-click the speaker icon on the Windows taskbar.
and make sure all the devices you want to use are listed as working. If a
Playback
To see all your devices, right-click anywhere on the property sheet and make sure
and
. Make sure the
Levels
.)
Test
and make sure all the devices you want to use are listed as working. If a
Recording
To see all your devices, right-click anywhere on the property sheet and make sure
and
). Click
) on the Windows taskbar.
"
Properties Notification area
check box.
Volume
Show Disconnected Devices
Show Disconnected Devices
. (To test the volume of a recording device, make sure
OK
.
.
Enable
are enabled.
). Click . (To test
OK
property
Playback
.
Enable
are enabled.
. Make
Levels