Hisense LCD42V68PAM Service Manual page 13

b、Press "Menu" button and enter factory OSD menu.
c、Select the item "Auto Color".
d、Press VOL+ button to auto color.
e、Close the OSD menu after 5 seconds.
3.2.2 Factory Option
Item 0
White Balance
Note: Before adjusting, please change to desired source. Different source has different WB
values.
Factory RESET
Auto Color
Color Temp
Picture Mode
LCD TV Service Manual
Item 1
R DRV
G DRV
B DRV
R CUT
G CUT
B CUT
Zhong Shi
Huang Dao
Gui Yang
Liao Ning
Hungary
Australia
France
Clean Protected
Clean All
For VGA and Component Video
sources, WB values must be
adjusted
Color
R Offset
G Offset
B Offset
Brightness Min
Brightness Mid
Brightness Max
Contrast Min
Contrast Mid
Contrast Max
Saturation Min
Saturation Mid
Saturation Max
Hisense Confidential
- 13 -
Note
Red Driver adjust
Green Driver adjust
Blue Driver adjust
Red Cut adjust
Green Cut adjust
Blue Cut adjust
Qingdao Jiangxi Road factory
Huangdao Industrial Park
Gui Yang Industrial Park
Liao Ning Industrial Park
Hisense Hungary
Hisense Australia
Hisense France
Clean data except
WB data and Auto Color data
Clean all data
And at others signal sources,
the "auto colour "does not
work.
Standard
Min Brightness
Mid Brightness
Max Brightness
Min Contrast
Mid Contrast
Max Contrast s
Min Saturation
Mid Saturation
Max Saturation