Problem Solving; What To Do When The Lights Come On Or Flash - Epson PowerLite Home Cinema 21000 User Manual

Problem Solving

This section explains how to interpret the projector's status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on the projector indicate the projector's
status and let you know when a problem occurs.
If the projector isn't working correctly, first turn it
off, let it cool down, and unplug the power cord.
Then plug the power cord back in and turn on the
projector. If this doesn't solve the problem, check
the projector's status lights.
Lights indicating normal operation
Light state
All lights are off
Power light flashes The projector is warming up. Wait for the picture to appear.
Power light is on
Cause and solution
The projector is turned off or in standby mode. You can unplug
the projector or turn it on.
Note: If the power button and power light don't light up,
they may have been turned off using the Illumination setting
(see page 44).
Projection is in progress.
Lamp and temperature lights
Power light
Power
button
57
Problem Solving