Table of Contents
Advertisement
■ Auto Setup
Signal > Auto Setup
Leave this setting on so that the projector automatically adjusts the tracking, sync, and
position of the image.
■ Tracking
Signal > Tracking
Adjust the tracking to eliminate vertical bands. It is easiest to
adjust the tracking when the image contains a lot of fine detail
(such as black text on a white background).
■ Sync.
Signal > Sync.
Adjust the synchronization to eliminate blurriness. For best results,
make sure the tracking is properly adjusted first.
Selecting Memory Settings and Resetting the
Projector
Your projector comes with 10 memory locations where you can save customized settings to
obtain the best picture quality for each of your video inputs. In addition, you can save the
current focus, zoom, and lens shift settings for reuse at a later time.
Selecting Memory Settings
You can easily recall the memory settings by using the memory
button on the remote control.
1. Press the
Memory
2. Select
Load Memory
3. Use the arrow buttons to select the desired setting, then press
the
button.
Enter
button on the remote control.
or
Load Lens Position
.
Making Detailed Adjustments
39
Advertisement
Table of Contents
