Table of Contents
Advertisement
After a moment, the image appears on the screen using the retrieved settings. Certain
settings may not be applied, depending on the input signal.
Note: Because of the mechanical nature of the lens, you may need to fine-tune the adjustment
after loading a saved lens position.
Creating Memory Settings
Memory settings can be used to store most of the picture quality settings on page 34 and color
settings on page 36. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
2. Select
Save Memory
3. Select the memory name you want to use, then press the
settings.
Note: Saved settings are indicated by a green highlight
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Renaming Memory Settings
You can rename memory settings so that they are easier for you to recognize.
1. Press the
2. Select
Rename Memory
3. Select the memory name you want to change, then press the
selection screen is displayed.
4. Do one of the following:
■
To select a name from the displayed preset names, select the desired name and press
the
Enter
■
To create your own name, select
the name. Use the arrow buttons to select a character, then press the
When you have selected all of the characters in your name, select
Enter
40
Making Detailed Adjustments
button on the remote control.
Memory
or
Save Lens Position
button on the remote control.
Memory
or
Rename Lens Position
button.
button.
.
Enter
next to the memory name. If you select
.
and use the keyboard screen to enter
Customized
button to save your
button. The name
Enter
button.
Enter
and press the
Finish
Advertisement
Table of Contents
