Lead-Free Soldering - Sony Ericsson W960 Working Instruction, Electrical

Working Instruction, Electrical

2 Lead-free soldering

K
EEP ALL CONTACT SURFACES CLEAN OF DIRT AND HAND
!
GREASE
T -
HIS PRODUCT IS MANUFACTURED WITH LEAD FREE SOLDER
- !
AND LEAD FREE COMPONENTS
During electrical repair, it is critical to make sure that no
lead is introduced.
This symbol indicates that the product is lead- free.
All lead-free PBA will be marked with this symbol.
A lead-free work area must be set up completely separated
from work areas that are used to make lead repairs.
The lead-free work area must also be clearly labeled with
the lead free symbol as shown in the adjacent picture.
The items on this desk must remain lead-free.
They must be adequately labeled to make their lead-free
status clearly and easily recognized.
4(35)
1206-4806 Rev1
©
Sony Ericsson Mobile Communications AB