Lead-Free Soldering - Sony Ericsson K750i Working Instructions

1 Lead-free soldering

Caution
Keep all contact surfaces clean of dirt and hand grease.
This product is manufactured with lead-free
solder and lead-free components!
During electrical repair, it is critical to make sure
that no lead is introduced.
This symbol indicates that the product is lead-
free.
All lead-free PBA's will be marked with this
symbol.
A lead-free work area must be set up completely
separated from work areas that are used to make
lead repairs.
The lead-free work area must also be clearly
labeled with the lead free symbol as shown in the
adjacent picture.
The items on this desk must remain lead-free.
They must be adequately labeled to make their
lead-free status clearly and easily recognized.
3/00021-2/FEA 209 544/94 C
©
Company Internal Sony Ericsson Mobile Communications AB
K750 Working Instructions - electrical
3(23)