② Tune; ③ Touch Response; ④ Chorus; ⑤ Reverb - SAWTOOTH ST-WDCP-88 Operation Instructions Manual

■Tune
1. Press [Tune] button to enter the function of cent adjustment, and LCD displays
"TUNE VAL".
2. Press +/- buttons to heighten or lower a cent or quickly adjust via data dial.
3. Holding [Tune] button for two seconds will reset the pitch of whole keyboard to
default value"00".
Instructions
Adjustable scope±50 cent.
■Touch response
By the function of touch response, you can control the touch of fingers to allow dynamic
variation of volume.
Press [TOUCH] button to switch touch level, altogether three touch levels for choice.
1.Press [TOUCH] button to open touch response and LCD displays the symbol
2.Press [TOUCH] button to Cycle through the 4 levels of touch sensitivity:
001/002/003/OFF.
Instructions
When you start the electric grand piano, touch keyboard will be set automatically and the
default touch level is 2.
■Chorus
Press [CHORUS] button to open preset chorus effect and LCD displays the symbol
Press [CHORUS] button once again, the chorus symbol will fade from LCD and close chorus
function.
■Reverb
Press [REVERB] button to open preset reverb effect and LCD displays the symbol
REVERB Press [REVERB] button once again, the reverb symbol
close reverb function.
Instructions
After starting the electric grand piano, reverb status is automatically opened.
7 Quick Guide
.
.
will fade from LCD and