Table of Contents
Advertisement
3. Example of selecting No.59 voice
<1> By pressing [5] and then [9] of digit buttons, voice [59] is selected.
<2> Voice [59] can be selected by pressing +/- buttons or data dial. LCD will display"59",
indicating voice [59] has been selected.
■Dual voice
1.By pressing [DUAL VOICE] button, LCD will display the symbol
. In this function,
after selecting the first voice, you can select the second voice and play together with the
first selected voice.
2.In one sonolayer, two different voices can be emitted simultaneously. You can select dual
voices by pressing +/- buttons or data dial.
Instructions
·The default dual voices are No.50 and STRING.
Effect Control
■Keyboard split
In the keyboard split mode, you can play different voices at left side and right side of "split
point". The setting of split point can be changed as required.
1.By pressing [KEYBOARD SPLIT] button, LCD displays the symbol
and the whole
keyboard is divided into left and right individual areas of performance.
2.Selecting split point. By holding [KEYBOARD SPLIT] button for several seconds, enter the
function of keyboard split point. Select required keyboard split point by pressing +/-
buttons or data dial or directly press a key to select split point. Releasing [KEYBOARD SPLIT]
button will exit the function of keyboard split and this point is new keyboard split point.
Instructions
Enter the function of keyboard split point and LCD temporarily displays current value of
keyboard split point. The default value is 025. The key at keyboard split point belongs to
left hand chord area.
6
Quick Guide
Advertisement
Table of Contents
