Brushing Modes - Philips Sonicare HealthyWhite 700 Series User Manual

2 After the 2 minutes of Clean mode, the White mode starts with a
change in brushing sound and motion. This is your signal to start
brushing the upper front teeth for 15 seconds.
3 At the next beep and pause, move to the bottom front teeth for
the final 15 seconds of brushing (Fig. 9).

Brushing modes

Philips Sonicare automatically starts in the default Clean mode. To
select a different brushing mode:
1 Press the on/off button to toggle between modes.
The green LED indicates the selected mode.
Note: You can only switch between modes when the toothbrush is
switched on.
- Clean mode: Standard mode for superior teeth cleaning.
- Sensitive mode (specific types only): Gentle yet thorough cleaning
for sensitive gums and teeth.
- Clean and White mode: 2 minutes of Clean mode with an
additional 30 seconds of White mode to focus on the visible front
teeth.
Note: When the Sonicare is used in clinical studies, the default
2-minute Clean mode must be selected. However, in whitening/stain
reduction studies, the Clean and White mode must be selected. The
handle should be fully charged and the Easy-start feature
deactivated.
Features
Easy-start
This Philips Sonicare comes with the Easy-start feature activated.
The Easy-start feature gently increases the power over the first 14
brushings to help you get used to the brushing with the Philips
Sonicare.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
11
English