Error Display - LG WD14030RD Service Manual

7-5. ERROR DISPLAY

If you press the Start/Pause button in error condition, any error except
machine will change into the pause status.
In case of , , if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in the case of
ERROR
1
WATER INLET
ERROR
WATER OUTLET
2
ERROR
3 OVERFLOW
ERROR
4
PRESSURE SENSOR
S/W ERROR
5
DOOR OPEN
ERROR
6
UNBALANCE
ERROR
7
THERMISTOR(HEATING)
ERROR
8 MOTOR LOCKED
ERROR
9
POWER
10
FAILURE
DRY HEATER
11
ERROR
All manuals and user guides at all-guides.com
, power will not be turned off.
SYMPTOM
• Not reached to the water level(246) within 8 minutes
• Not fully drained within 10 minutes.
• Water is over flowing (over 8 level).
• The sensor pressure switch is out of order.
• In case of operating the reservation function or the
• The door switch is out of order.
• The appliance is tilted.
• Laundry is gatherd to one side.
• The THERMISTOR is out of order.
• The connector in the LEAD WIRE ASSEMBLY is
• The hall sensor is out of order/defective.
• Water leaks
• The washer ecperienced a power failure
• The Dry Heater is out of order
• The Connector of the Dry Heater is not connected
• The Dry fan motor is out of order
20
will disappear and the
CAUSE
after water supplied or not reached to the preset
water level within 25 minutes.
If " " is displayed, the drain pump operates
to drain the water automatically.
other function with door opened. Close the door,
then the error display is resolved.
not connected to the connector of STATOR
ASSEMBLY.
Reconnect or repair the connector.
Replace the STATOR ASSEMBLY
properly to the connector in the Main PWB ASSEMBLY
Page 21
Page 23
Page 25
Page 26
Page 27
Page 22
Page 28
Page 29
Page 37
Page 34
Page 31