KStrong UFL201701 User Instruction Manual
Energy absorbing lanyards
Hide thumbs
Also See for UFL201701:
- User instruction manual (12 pages) ,
- User instruction manual (12 pages)
Advertisement
Quick Links
USER INSTRUCTION MANUAL
ENERGY ABSORBING LANYARDS
THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODELS:
UFL201701, UFL201721, UFL201101, UFL201111, UFL201121, UFL201131, UFL204101,
UFL204111, UFL204121, UFL204131, UFL206101, UFL206111, UFL206121, UFL206131,
UFL201402, UFL201422, UFL201601, UFL201622, UFL201301, UFL201331
Advertisement
Related Manuals for KStrong UFL201701
Summary of Contents for KStrong UFL201701
- Page 1 USER INSTRUCTION MANUAL ENERGY ABSORBING LANYARDS THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODELS: UFL201701, UFL201721, UFL201101, UFL201111, UFL201121, UFL201131, UFL204101, UFL204111, UFL204121, UFL204131, UFL206101, UFL206111, UFL206121, UFL206131, UFL201402, UFL201422, UFL201601, UFL201622, UFL201301, UFL201331...
-
Page 2: Technical Specification
The instructions provided in this manual are meant for the use of this equipment and should be read thoroughly and understood by the user before the equipment is used. Manufacturer's instructions must be properly followed for the correct use and maintenance of this equipment. Please contact KStrong for any questions regarding use of this equipment. -
Page 3: Component Compatibility
Such harmful environments requires a more frequent inspection and servicing program of the fall protection Ÿ equipment to maintain the integrity and safety of the equipment. Contact KStrong if in doubt. All the synthetic material of fall protection equipment must be protected from slag, hot sparks, open flames or Ÿ... - Page 4 The connectors used should be suitable to each application. Ensure that they are fully closed and locked while in use. NEVER USE INAPPROPRIATE CONNECTIONS While using KStrong snap hooks and carabiners, they should not be connected as below: Ÿ Two or more connectors should never be attached to a single D-ring.
- Page 5 Moving Machinery and Vehicles Ÿ Please contact KStrong with any questions regarding the use of this equipment in the presence of any environmental hazard. WARNING This equipment is not designed to be used in high temperature environments. It is important to protect this equipment when using near activities like welding or metal cutting.
- Page 6 It is important to consider the below mentioned limitations before using or installing this equipment. Ÿ The capacity of the KStrong Full Body Harness is up to 340 lbs. (140 kg) hence, the combined weight (clothes, tools, shoes etc.) of a person using these harnesses should not be more than 340 lbs. It is important to ensure that all the components in the system are rated to a capacity which is appropriate to the application.
- Page 7 If the user is going to be suspended for an extended length of time, it is recommended that some form of a seat support should be used. KStrong recommends a seat board, suspension work seat, seat sling, or a boatswain chair.
- Page 8 These lanyards are designed in such a way that they work in sync with other elements of a personal fall arrest system. While they are designed to arrest a fall from height, they also minimize the impact load on the wearer. KStrong recommends that only those components or sub systems of the PFAS manufactured by KStrong are used in combination.
- Page 9 If Inspection reveals an unsuitable, unsafe condition of the energy absorbing lanyard, or of any other sub unit of the fall arrest system, then the unit must be immediately removed from further use. Only KStrong and parties who are authorized may conduct repairs to the equipment.
- Page 10 PFAS and limit maximum arrest forces to 1800 lbs. (8 kN) or less. MAINTENANCE, SERVICE AND STORAGE KStrong energy absorbing lanyards can be cleaned with water and a mild soap solution. However, if a lanyard is Ÿ...
- Page 11 Never use bleach or bleach solutions to clean the lanyard as this may damage the webbing. Always dry the lanyard by hanging to air dry. Do not force dry with heat. The hardware should be wiped off with a clean dry cloth. Contact KStrong with any questions. Ÿ...
- Page 12 Other relevant information (e.g. Document number) PERIODIC EXAMINATION AND REPAIR HISTORY Reason for entry Defects noted, repair Periodic Name and signature (periodic examination Date carried out and other examination of competent user or repair) relevant information next due date KStrong.com BRAZIL ASIA...
Need help?
Do you have a question about the UFL201701 and is the answer not in the manual?
Questions and answers