Advertisement
2. Outside Dimensions
P-250SB-E
Pipe guide(OA/RA)
Pipe guide(SA/EA)
Wall mount hook top
P-350SB-E
Pipe guide(OA/RA)
Pipe guide(/SAEA)
Wall mount hook top
3. Installation Procedure
WARNING
Select a place which is strong enough to support the
product, and install the product securely.
Injury could result if parts fall.
201
15
Pipe guide(SA/EA)
Pipe guide(OA/RA)
15
201
φ
122
593
650
Pipe guide(SA/EA)
191
51
Pipe guide(OA/RA)
51
191
φ
145
430
655
2
558
Wall bracket
(accessory)
179
179
200
355
21
Wall mount hook center
Under fix piece
Wall bracket
590
(accessory)
200
200
21
200
Wall mount hook center
Under fix piece
CAUTION
Install the product in the indoor side of the insulation layer/
airtight layer.
When installed on the outdoor side of the heat insulating
layer, the temperature of the heat-exchanged air will drop and
condensation will form, which will cause the floor to get wet.
The products should be attached to a vertical and flat
surface.
The products may not be properly mounted and may cause
deformation of the product.
Transportation and installation of the product is carried out
by two or more people.
Cause of damage or injury of the product due to product fall.
Wear gloves when installing.
Failure to heed this warning may result in injury.
Note
- The product is designed for wall mounting, only on a solid wall.
(Wall strength is needed more than 250 kg/m
- A gypsum block or stud/plasterboard wall will not suffice.
Accessories
Wall bracket: 1
179
Heat insulating
materials: 4
Unit (mm)
200
Unit (mm)
.)
2
Advertisement
