The Menu Item 'Rf Channel' (I.e. Frequency Selection) - GALAXIS SHOWTECHNIK PYROTEC PFE Advanced Mini 5 Outputs User Manual

The menu item 'RF Channel' (i.e. frequency selection)

This menu item enables the user to determine which radio channel (RF = Radio Frequency) is being
used by the device.
If you are changing the RF channel you will have to program all other devices to the new RF channel
to ensure proper radio communication.
WARNING
2.1.4
4.2.4.1 European Version (and also various other countries)
There are 70 different frequencies available between 433.0500 MHz and 434.7750 MHz in steps of 25
kHz. Normally you should use the frequency that has been assigned by the manufacturer and only
switch to another channel if the selected frequency is occupied.
The frequency 433.9250 MHz (radio channel 35) and the two neighboring channels should not be
used. This is a heavily used standard frequency and radio interferences are likely to occur.
In the countries Azerbaijan, Georgia and Russia the European harmonization standards have not
been completely implemented so far. If you have an application in these countries, please ask the
manufacturer or the appropriate authorities in the specific countries if a license exempt usage is
possible or if you can apply for a license or if the usage is prohibited.
Other regulations may apply in non-European countries. Please ask the manufacturer if you need
more information about the usage of frequencies. Most non-European countries allow the frequencies
used by us. For customers in the USA and Canada we provide devices with a different frequency
band. Please see 'Version for USA/Canada'.
4.2.4.2 Version for USA/Canada
There are 360 different frequencies available between 458.0000 MHz and 462.4875 MHz with a
channel spacing of 12.5 kHz.
You need to choose a frequency which allows nationwide use and which is exempt from any duties.
More information can be obtained from frequency coordinators, the authority who is in charge of
frequency allocation or the manufacturer. Even if the duty-free and nationwide usage of specific
frequencies is possible, you have to register as user at the FCC before operating the devices. Upon
your request we will provide the contact details of a competent frequency coordinator who will support
you in this process.
The device shows the channel number as well as the frequency. With 'Up'
and 'Down' you can adjust the radio channel.
Unintentional triggering of a firing if the user is splitting a Galaxis
firing system into two or more systems
Simultaneous operation of systems that vary only in terms of different
radio channels bear a safety risk.
If you split your Galaxis firing system into two or more systems:
•
Make sure that you have assigned different System IDs to the
firing systems.
24