The Menu Item 'Device Id Number - GALAXIS SHOWTECHNIK PYROTEC PFE Advanced Mini 5 Outputs User Manual

TIP

The menu item 'Device ID number'

number has been programmed the receiver can not be accessed from the controller PFC during
remote data requests and programming. Normally the devices are programmed with ID numbers in
consecutive order. It is not allowed to program the same ID number to more than one device.
In this menu item you can program the 4 digit code. If 0000 has been
programmed there will be no code request after power-up. Activate 'Up' now
to change the code.
If you have selected 'Yes' you will see this text in the display. The digits can
be altered with 'Up' and 'Down'. With 'Mode' you jump to the next digit. If
you activate 'Mode' and no number has been selected a '0' will be
programmed for this digit.
A code has been entered in this example. Memorizing your access code
well is essential for the safety code request next time you turn on the
device. For reasons of safety once programmed the code will never be
displayed again.
If you have forgotten the programmed code you are still able to operate
the device by entering the universal code 16777216. You can program a
new user code in the submenu after entering this universal code so that
you can use your device normally the next time.
This is the next menu item in the submenu. A device ID number ranging
from 1 to 999 can be programmed here. The device ID number is used as
an identification address during bi-directional remote access. If no device ID
23