The Function Of The Info Led; Switching Off; Firing Mode - GALAXIS SHOWTECHNIK PYROTEC PFE Advanced Mini 5 Outputs User Manual

3.7 The function of the Info LED

The following status information is being displayed by the Info LED:
Blue color,
Continuously
Blue color,
Flashing
Red color,
Flashing
If the flashing Info LED should be disturbing e.g. on the stage you can deactivate this function in the
submenu. For further information regarding this feature please see the sections of the menu items
'Flashing LED if receiving' in this manual.

3.8 Switching off

The device is switched off by activating 'Mode' with the magnetic pen for approx. 1 second. Then you
will enter the first menu item and you will see the following display:

3.9 Firing mode

If the controller is in firing mode the display will show the following text e.g.:
TIP
TIP
The device is displaying start messages or the menu has been entered.
The device is in receiving mode.
The device is in receiving mode and the accumulator should be charged
because the charging level is below 30% (i.e. low battery warning).
The device will be turned off as soon as the sensor area 'On/Off' is being
activated with the magnetic pen. You will enter the first main menu item by
activating 'Mode'.
When the receiver is turned off, this message appears first.
Immediately afterwards, this display appears and the device switches itself
off.
Instead of the vertical bar a moving character 'F' is displaying that the
controller is in the firing mode.
Every time the firing mode is turned on or off the controller transmits this
information to the receiver. If the status of the firing mode is being
changed the receivers can only display the current status of the firing
mode correctly if they are in the receiving mode and within radio
coverage.
If the firing mode is being switched off all active outputs are turned off. It
does not matter if the outputs have been turned on due to a conventional
firing or by a firing of the terminal function. In addition, all stepping
sequences that are currently in progress are deleted. All this requires that
the receiver is within radio range and that this information is being
received.
14