Basic Operation Of The Device; Insertion Of Batteries, Power Supply, Operation Time; Switching On; Warning Messages After Switching On - GALAXIS SHOWTECHNIK PYROTEC PFE Advanced Mini 5 Outputs User Manual

3 Basic operation of the device

3.1 Insertion of batteries, power supply, operation time

First you have to insert new batteries. Please mind correct polarity. Open the battery compartment,
insert the batteries and close the lid again afterwards.
You should remove the batteries if you do not use the device for a longer time.
WARNING
2.1.6

3.2 Switching on

By a short activation of the sensor field 'On/Off' the device is being switched on.
First a start message is being displayed followed by the display of the software version:
'S' indicates that the device has been equipped with the optional stepping function.
'Z' indicates that the device has been equipped with the optional Sleep function.

3.3 Warning messages after switching on

After the software version the device will display warning messages if there are any:

3.4 Code request

To restrict the operation of the device to authorized personnel only you can choose to set an access
code. This option can be selected in the submenu.
For more information please see the section of the menu item 'Code' in this manual.
The device will not activate the receiving mode if no correct user code has been entered.
If '0000' has been selected as the access code no access code will be requested after power-up.
Leaking batteries or moisture in the device
Leaking batteries or moisture in the device may trigger firings.
•
The device must be protected against moisture.
•
Do not use the device after ingress of moisture.
•
If batteries have leaked, send the device to the manufacturer for
repair.
•
Follow all safety instructions and regulations at all times.
The temperature fuse is blown. You will find more information in the section
of the menu item 'Temperature Fuse'.
12