Graco 482 Series Instructions-Parts List Manual page 5

Automatic metering valves 3200 psi (220 bar, 22.0 mpa) maximum fluid working pressure
Hide thumbs Also See for 482 Series:
Table of Contents

Advertisement

FIRE AND EXPLOSION HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
D Ground the equipment and the object being sprayed. See Ground the System on page 6.
D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvent or the fluid being
dispensed.
D Extinguish all the open flames or pilot lights in the dispense area.
D Electrically disconnect all the equipment in the dispense area.
D Keep the dispense area free of debris, including solvent, rags, and gasoline.
D Do not turn on or off any light switch in the dispense area while operating or if fumes are present.
D Do not smoke in the dispense area.
D Do not operate a gasoline engine in the dispense area.
D If there is any static sparking while using the equipment, stop dispensing immediately. Identify
and correct the problem.
TOXIC FLUID HAZARD
Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the
skin, swallowed, or inhaled.
D Know the specific hazards of the fluid you are using. Read the fluid manufacturer 's warnings.
D Store hazardous fluid in an approved container. Dispose of the hazardous fluid according to all
local, state, and national guidelines.
D Wear appropriate protective clothing, gloves, eyewear, and respirator.
WARNING
310543
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents