Warnings - Graco 482 Series Instructions-Parts List Manual

Automatic metering valves 3200 psi (220 bar, 22.0 mpa) maximum fluid working pressure
Hide thumbs Also See for 482 Series:
Table of Contents

Advertisement

Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and
INSTRUCTIONS
result in serious injury.
D This equipment is for professional use only.
D Read all instruction manuals, warnings, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are uncertain about usage, call your
Graco distributor.
D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D Check the equipment daily. Repair or replace worn or damaged parts immediately.
D Never exceed the recommended working pressure or the maximum air inlet pressure stated on
your pump or in the Technical Data on page 21.
D Be sure that all spray/dispensing equipment and accessories are rated to withstand the maxi-
mum working pressure of the pump. Do not exceed the maximum working pressure of any
component or accessory used in the system.
D Route the hoses away from the traffic areas, sharp edges, moving parts, and hot surfaces. Do
not expose Graco hoses to temperatures above 82° C (180° F) or below -40° C (-40° F).
D Do not use the hoses to pull the equipment.
D Use fluids and solvents that are chemically compatible with the equipment wetted parts. See
the Technical Data sections of all the equipment manuals. Always read the material manufac-
turer's literature before using fluid or solvent in this pump.
D Always wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid
and solvent manufacturers.
D Wear hearing protection when operating this equipment.
D Comply with all applicable local, state and national fire, electrical and other safety regulations.
Symbols
Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
CAUTION
310543
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents