Table of Contents
Advertisement
General information
Access codes
Lock code
The lock code (5 to 10 digits) helps to protect your phone
against unauthorized use. The preset code is 12345. Change
the code, and keep the new code secret and in a safe place
separate from your phone. To change the code and to set
the phone to request the code, see
If you enter an incorrect lock code five times in
succession, the phone ignores further entries of the code.
Wait for 5 minutes, and enter the code again.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
PIN codes
The personal identification number (PIN) code and the
universal personal identification number (UPIN) code (4 to
8 digits) help to protect your SIM card against
unauthorized use. See
usually supplied with the SIM card.
The PIN2 code (4 to 8 digits) may be supplied with the SIM
card and is required for some functions.
10
Copyright © 2007 Nokia. All rights reserved.
"Security,"
p. 71.
"Security,"
p. 71. The PIN code is
The module PIN is required to access the information in the
security module. The module PIN is supplied with the SIM
card if the SIM card has a security module in it.
The signing PIN is required for the digital signature. The
signing PIN is supplied with the SIM card if the SIM card
has a security module in it.
PUK codes
The personal unblocking key (PUK) code and the universal
personal unblocking key (UPUK) code (8 digits) are required
to change a blocked PIN code and UPIN code, respectively.
The PUK2 code is required to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact
your local service provider for the codes.
Barring password
The barring password (4 digits) is required when using
barring. See
"Call barring,"
password from your service provider.
If you enter an incorrect barring password three times in
succession, the password is blocked. Contact your service
provider.
Call
p. 74. You can obtain the
Advertisement
Chapters
Table of Contents
