Send Data; Paired Devices View - Nokia 5700 XpressMusic User Manual

C o n n e c t i v i t y
My phone's name—to define a name for your phone.
Remote SIM mode > On—to enable the usage of the SIM
card of the phone by another device (for example, a car kit)
by Bluetooth technology (SIM access profile).
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.

Send data

There can be only one active Bluetooth connection at a
time.
1 Open an application where the item you wish to send is
saved.
2 Scroll to the item you want to send, and select
> Send > Via Bluetooth.
3 The phone starts to search for devices within range.
Paired devices are shown with
When searching for devices, some devices may show
only the unique device addresses. To find out the
unique address of your phone, enter the code *#2820#
in the standby mode.
90
Copyright © 2007 Nokia. All rights reserved.
4 Select the device with which you want to connect.
5 Pair the devices
6 When the connection has been successfully
Data received using Bluetooth connection can be found in
Options Inbox

Paired devices view

.
Paired devices are indicated by
In the Bluetooth main view, scroll right to open a list of
paired devices.
If you have searched for devices earlier, a list of the
devices that were found previously is shown first. To
start a new search, select
off the phone, the list of devices is cleared, and the
device search needs to be started again before sending
data.
• If the other device requires pairing before data can
be transmitted, a tone sounds and you are asked to
enter a passcode.
• Create your own passcode (1–16 digits) and agree
with the owner of the other device to use the same
code. You do not have to memorize the passcode.
• After pairing, the device is saved to the
devices view.
established, the note Sending data
in Messaging.
More devices. If you switch
Paired
is displayed.
in the search result list.