Extreme Networks AG200 Installation Manual page 35

To login to Sentriant Manager:
From the Sentriant Manager Login screen,
type in the Sentriant IP Address and port number separated by a colon.
●
Example: http://192.168.65.2:22
NOTE
If the Sentriant resides in a Network Address Translation (NAT) environment, the NAT port assigned to the
Sentriant must be specified when logging in. By default the port number is 22 and may be excluded in non-NAT
environments.
type in Username
●
Example: admin
type in the user's password
●
Example: ******
Select the Connect radio button and click Login.
●
NOTE
Sentriant Manager can be started in a demonstration mode for training and to review the software. By double-
clicking three times on the Extreme Logo, the Sentriant Manager does not connect to a Sentriant and runs
locally. Demo mode can be run with training data or without.
NOTE
Selecting Remember Settings will save the Sentriant IP Address, username, password, and the connection type,
either connect or demo mode.
Sentriant Installation Guide
Installing Sentriant Manager
35