Indoor Flush Mount Type Installation - Samsung SPD-3750T Installation Manual

Indoor Flush Mount Type Installation

1. Attaching Flexible Adaptor
To feed the cables through a pipe to a flush housing, attach the flexible adaptor enclosed
with the product. To attach the flexible adaptor, the install base must be disassembled as
shown in the picture. To disassemble the install base, unscrew the 3 screws on the
bottom.
Silicon Cap
Install Base(STB-370PC)
disassembly
2. Attaching Template
Attach the enclosed template to a desired location on the ceiling. Drill 3 holes of 50 mm
diameter in 120-degree intervals following the marks on the template, and then drill one
200 mm hole in the center of the template.
3. Wiring and Arranging Anti-fall Eyebolts
Attach the enclosed turnbuckle and eyebolts inside the ceiling, and then drop the camera
cables down from the ceiling through the hole.
Template
Notes
 •   D onotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
26
SPEED DOME CAMERA ACCESSORIES
All manuals and user guides at all-guides.com
Adaptor Nut
Turnbuckle
Φ200 mm
Ceiling
Flexible Adaptor
Eyebolt
Template
Ind
4. Prepar
Open th
While p
open (2
5. Inserti
Arrang
the cei
6. Securi
Two fix
Depend
The inn
mount