Extreme Networks Summit 300-48 Software User's Manual page 86

Wireless Networking
Table 31: Client Current State Details (continued)
Value
Client VLAN
Client Priority
Tx Frames
Rx Frames
Tx Bytes
Rx Bytes
Client Debug Information
The following commands support debugging of individual client problems. They are designed to
provide the information to assist debugging client connectivity problems that stem from non-physical
layer problems (i.e. WEP configuration problems).
Table 32: Client Debugging Commands
Commands
enable wireless port <portlist> interface
[1|2] client-history
disable wireless port <portlist> interface
[1|2] client-history
show wireless port <portlist> interface [1|2]
client-history configuration
clear wireless port <portlist> interface [1|2]
client-history counters <MAC|all>
configure wireless port <portlist> interface
[1|2] client-history size <#>
configure wireless port <portlist> interface
[1|2] client-history timeout <X>
show wireless port <portlist> interface [1|2]
client-history status
show wireless port <portlist> interface [1|2]
client-history mac-layer <MAC>
show wireless port <portlist> interface [1|2]
client-history diagnostics <MAC>
Table 33: Client Diagnostic and History Information
Variable
Enable
TableSize
86
Description
VLAN assigned to this client by a radius VSA or other mechanism.
This is only valid for clients in FORWARDING.
Quality of service (QoS) level for the client
The number of frames transferred to the client
The number of frames returned by the client
The number of bytes transferred to the client
The number of bytes returned by the client
Description
This command directs the Altitude 300 to keep client historical
information.
This command directs the Altitude 300 to disable logging of client
historical information.
Use this command to view the current configuration of the client
history and diagnostic features.
Use this command to clear counters for a specific MAC address or
all clients. Note that the client entries will not be removed from the
client information database.
Use this command to configure the client history size.
Use this command to configure the client history time-out interval.
Setting the timeout to 0 is equivalent to disabling age-out of client
history entries.
Use this show command to retrieve the current status of the
historical client information. This command will display information
about the client diagnostic and history database (see Table 33).
Use this command to show the information collected on a per-client
basis. Using the mac-layer command includes information on the
operation of the 802.11 MAC layer.
Use this command to show the information collected on a per-client
basis. Using the diagnostic command will display counters and errors
contained in the extremeWirelessClientDiagTable.
Description
This value indicates if historical information is being collected on this interface or
not.
This is the number of entries allowed in each of the historical client tables.
Summit 300-48 Switch Software User Guide