Extreme Networks Summit 300-48 Software User's Manual page 46

Managing the Switch
Table 11: RADIUS Commands (continued)
Command
config radius [primary | secondary]
server [<ipaddress> | <hostname>]
{<udp_port>} client-ip <ipaddress>
config radius [primary | secondary]
shared-secret {encrypted} <string>
show radius
unconfig radius {server [primary |
secondary]}
RADIUS RFC 2138 Attributes
The RADIUS RFC 2138 optional attributes supported are as follows:
• User-Name
• User-Password
• Service-Type
• Login-IP-Host
RADIUS Server Configuration Example (Merit)
Many implementations of RADIUS server use the publicly available Merit
available on the World Wide Web at:
http://www.merit.edu/aaa
Included below are excerpts from relevant portions of a sample Merit RADIUS server implementation.
The example shows excerpts from the client and user configuration files. The client configuration file
( ) defines the authorized source machine, source name, and access level. The user
ClientCfg.txt
configuration file (
users
ClientCfg.txt
#Client Name Key
#---------------- ---------------
#10.1.2.3:256 test
#pm1 %^$%#*(&!(*&)+
#pm2 :-):-(;^):-}!
#merit.edu/homeless hmoemreilte.ses
46
Description
Configures the primary and secondary RADIUS server. Specify the
following:
• [primary | secondary] — Configure either the primary or
secondary RADIUS server.
• [<ipaddress> | <hostname>] — The IP address or hostname
of the server being configured.
• <udp_port> — The UDP port to use to contact the RADUIS server.
The default UDP port setting is 1645.
• client-ip <ipaddress> — The IP address used by the switch
to identify itself when communicating with the RADIUS server.
The RADIUS server defined by this command is used for user name
authentication and CLI command authentication.
Configures the authentication string used to communicate with the
RADIUS server.
Displays the current RADIUS client configuration and statistics.
Unconfigures the radius client configuration.
) defines username, password, and service type information.
[type]
--------------
type = nas
type=nas
type nas
AAA server application,
©
[version] [prefix]
--------- --------
v2 pfx
pm1.
pm2.
Summit 300-48 Switch Software User Guide